Rod Holder Single with Bait

Rod Holder Single with Bait
Click to enlarge

More images

Click to enlarge
Price: $28.95
Product ID : MMP-1061
Weight: 1.00 lbs
E-mail to a friend

Purchase

Description

This rod holder is available in a standard and a guide model. The difference being the standard model has a narrower profile using a 1.5" tube and a "T" knob for quickly taking a couple wraps of the line to secure the line from blowing around. The standard model was designed to hold bait in the tube rather than the weight but can be used either way. The Guide model has a slightly larger width to accommodate a 2" tube and has no "T" knob and is designed to hold a larger diameter cannon ball weight in the tube. Both models are available in either right or left facing. A left facing holder has the rod slot on the left and the tube on the right.

This rod holder has been slightly re-designed thanks to the help of Guide Rob Bignal. Rob wanted a larger tube for holding larger canon ball weights used while halibut fishing and he also wanted them different for each side. The new part has a right and left side so you must choose when ordering. I have only made this new model in black but they could be special ordered in white.

This line of vertical rod holders incorporate a bait holding tube and work like our 1070 series of rod holders. These rod holders were designed after our original rod holders were designed by the request of several guides who wanted a place to store their clients bait when the rods are stored during periods of travel between fishing areas. We took our original design and added ABS or PVC tubes to hold bait. The bait tube models have a top and bottom section with shock cords on both top and bottom to help hold the rods a little more secure.  

These accessories feature our accessory mounting system to allow mounting in three ways. These accessories can be mounted to the rail system by  using one of our part  1022 accessory mounts, or can be mounted directly to the vessel and be easily removed by using one of our hard accessory mounts part 1010-M. The third method would be to attach the accessory directly to the vessel.

Models 1062 & 1063 require 2 mounts when utilizing part 1022 or 1010-M for mounting

These accessories are available in black and can be special ordered in white at no additional cost but lead time will vary.

Product Reviews

Login or Register to write the first review.