Rubber Gasket for Anchor Locker

Rubber Gasket for Anchor Locker

Our Anchor Locker Rubber Gasket serves several purposes. The rubber gasket acts as a spacer; some aluminum boats have an extruded gunnel guard at the top of gunnel and at the bow, this gasket spaces the anchor locker above that lip for a secure connection. The rubber gasket also works to protect fiberglass when the Anchor Locker is mounted to a glass boat. Lastly, the rubber gasket works well when bolting to diamond plate and will protect any painted surfaces. This product ships free when purchased with the Anchor Locker standard or Weld on.

Products You May Like

Trolling Motor Offset Plate

Product ID: MMP-10014

Aluminum Backing Plate for Anchor Locker

Product ID: ALBP

The aluminum backing plate was designed to be used either as a spacer or a strongback backing...
Trolling Motor Removable Mount

Product ID: MMP-10013

**PLEASE READ** with higher thrust motors such as the Garmin Kraken and Minn Kota Instinct Quest,...
Bow Roller

Product ID: bow_roller

4" Long | 1/2" Hole | Polyethylene
Anchor Locker Replacement Pin

Product ID: MMP1001-P

Anchor Locker replacement pin fits the current model as well as all past models. The pin is...
Base Mount Removable Mount System

Product ID: MMP-10012