The New gutter system will allow you to direct waste water sprayed out the back of the table into an enclosed gutter that drains into a 6’ long supplied 1 ¼” flexible non kink hose. The gutter system comes as an add on accessory to my line of fillet / rigging tables in 40” or 32” size. You can either run the hose over board or direct it into a container to be dumped later. The gutter system features a cleanout port on each end. A longer hose maybe ordered.
The 40” & 32” table gutter systems were designed to work with any 40” or 32” production table manufactured by Miller Marine Products. All of our new tables will be drilled to accept this gutter system tables sold prior to 7/10/18 can be retrofitted to accept the gutter system by sending the table to Miller Marine products. This retrofit can be done by the customer but will require accurate hole drilling and placement.
The gutter system is made from ½” Starboard and held together with SS screws. I recommend using silicone not supplied with the table during assembly to seal the joints.