Rigging & Fillet Table 20" x 12"

This table is available in white or black. I have added a new feature to the table an engraved ruler scale on the front edge between the sides.

20″ x 12″ Fillet / Rigging Table with included gutting tray. This table uses one mounting shaft, the 24″ and larger tables use 2 mounting shafts. The mounting shaft is sold separately. We suggest using our aluminum machined rod holder mounts to mount the tables but the tables can be mounted using the 2 provided mounting bolts in the bottom of the table. The mounting bolts are adjustable for spacing inside a track machined into the table. Make sure and check out our new Strong Arm Mounting System this new system is adjustable to mount to any angle mounting surface. Strong Arm Mounting System

This table features a plug cut herring jig built into the right side of the table it has a row of 1/4″ holes for temporarily storing hooks or jigs 3 slots sized for scissors or pliers. This table comes with one set of fillet knife holders and has room to add a second set of knife holders as an option.We do not machine our knife holder slots all the way through intentionally when you push your knife through the .050″ skin it will form fit to your knife and keep the knife tight in the holder.

The tables are pre drilled for an optional pre tied leader/ line spool holder. Pre tied leader holder material is not included. A section of foam pipe insulation works great for pre tied leaders and a small section of 1/2″ PVC pipe and you are set. I do not include these items because you are going to want extras and it will save you money to make your own, all that is needed is a hacksaw.

The machined mounting shafts attach to a sliding mount that gives about 6″ of for and aft adjustment. The mounting shafts are machined from solid 1″ 6061 T-6 aluminum. The shafts are machined to fit Fish-On®, Folbe® or Scotty® rod holder mounts. You have your choice of styles this must be specified when you order.  The machined aluminum rod holder mounting shafts come in three lengths 6″, 8″ & 12″ see our rod holder extensions for price and styles.

The table is constructed from King StarBoard® that is environmentally stabilized to withstand the harshest marine conditions. It will not warp, rot, or delaminate when exposed to humidity or water.

All screws & hardware are stainless steel these tables are constructed from the best materials available, keep in mind Starboard® is very expensive,  but it is the best material available for this application

This table can also be special ordered in black but it will usually delay delivery as we do not stock the tables in black and will be cut when we are cutting other parts from the black material.