Our weight box has a series of dividers that can be removed and configured to suit the customer’s needs. I designed the dividers in a way that keeps the dividers from moving up and allowing parts to mix. The weight box is made from .5” Starboard. The weight box has a pair of handles at each end for easy carrying. The box is designed with drain holes and 4 feet to keep the box from sitting directly on the vessel floor to stop moisture issues.
The weight box features our accessory mounting system to allow mounting in three ways. The weight box can be mounted to the rail system by using two of our part 1022 accessory mounts, or can be mounted directly to the vessel and be easily removed by using two of our hard accessory mounts part 1010-M. The third method would be to attach the accessory directly to the vessel. (We do not recommend traveling on the trailer or rough water with the weight box on the rail.)
This accessory is available in black and can be special ordered in white at no additional cost but lead time will vary.
